Anyone Using a creality CR-10s Pro

Home Forum Printing and Tech. Support 3D printers Anyone Using a creality CR-10s Pro

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #62149

    Having some issues with printing with my CR-10s pro.

    Does anyone have any fff files that are working well with this printer with the latest version of Simplify 3d?






    My process so far. I open factory file Slice with S3d. open file with Notepad ++, find and replace G1 E-0.8000 F1800 with G1 E-3.7000 F5000 replace ALL (Make sure you save it) dont work if you dont save…. and i have G29 ; auto-bed level with in my start up script This has worked for both my cr-10s and my cr-10s pro’s but my non pros do not use the g29 command same process My full startup script
    G28 ; home all axes
    G29 ; auto-bed level
    G1 Z5 F3000 ; lift
    G1 X5 Y10 F1500 ; move to prime
    G1 Z0.2 F3000 ; get ready to prime
    G92 E0 ; reset extrusion distance
    G1 Y80 E10 F600 ; prime nozzle
    G1 Y100 F5000 ; quick wipe
    as far as profile im just using the CR-10S Pro profile with in S3D

    Hope this helps ya ?¿?

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.