BF 109 – Wing Questions

Home Forum Printing and Tech. Support BF 109 – Wing Questions

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #10529

    Concerning the third wing sections for the BF 109 kit: in the cavity where the servos mount, how essential are the floor and ceiling of that cavity (the floor being where the wing’s bowden tube stops, and the ceiling being opposite that)? When I print it, even at super slow speeds, the floor only seems to print in strings. The walls of the cavity print fine. But I stopped my first print before it got to the ceiling, and my second print failed rather grandly overnight, so I have yet to test the ceiling/overhang.

    Would a support in that spot help? Or is there an alternative? As far as specs, I can’t list them all here at the moment, but I’m running a modified HICTOP Prusa i3, using Cura 2.3.1 as my slicer.


    It won’t let me edit it now, but here are my specs in list form. Will take pictures tonight

    Printer: Modified HICTOP Prusa i3
    Slicer: Cura 2.3.1
    Airplane: Me BF109 F/H
    Filament: Inland 1.75mm PLA – Silver

    Stepan Dokoupil

    Hello and thanjs fir interest, yes thus is OK, as we need achieve lightweight result this near to horizontal spot is only strings, but it wiil be covered with servo…

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.