Current Mig 15

Home Forum Printing and Tech. Support RC equipment Current Mig 15

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #21532
    AvatarKlaus
    Participant

    Hallo,
    my name is Klaus, from Germany.
    I printed the Mig 15 and plan to fly with the Dr. Mad Thrust 90mm 11-Blade Alloy EDF 1700kv.
    I tested the Impeller and the current was about 90AH.
    Which one flew his Mig and can me tell something about the current?
    And the flying time with two 3S 2400mAh battery?

    Klaus

    #22335
    Avatarthewzdoc
    Participant

    It doesn’t seem like anyone from 3DLab frequents the forums… not a great support platform if there is no support guys.

    #22405
    Petr ŠťásekPetr Šťásek
    Keymaster

    Hi Klaus,

    see the manual, there’s value of 4 min flight time. Recommended ESC is 100A, so the current of 90A seems to be right on specs.

    I didn’t print the Mig myself yet, hope someone with more actual experience could answer this better.


    @thewzdoc
    :
    We’re always trying to answer all questions asap and as best as we can, just be a bit patient, Stepan and Patrik are working on new planes and answering each and every question on the forum is quite time consuming.

    #22416
    AvatarKlaus
    Participant

    Hi,
    today i dit it! I flew the Mig 15 today.
    It was great it flew verry well!
    A short headcam video:
    https://youtu.be/03clYsslFQo

    Klaus

    #22419
    Petr ŠťásekPetr Šťásek
    Keymaster

    Congratulations!

    Great runway by the way 🙂

    #22425
    Avatarthewzdoc
    Participant

    Thank you Petr… looking forward to that F4U 🙂

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.