F4U / F2G wing pegs

Home Forum Printing and Tech. Support Assembly, finishing F4U / F2G wing pegs

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #32914
    Avatarross
    Participant

    Can the wing peg system using carbon rod incorporated in the new F2G Corsair also be used on the original F4U Corsair?

    Regards,
    Ross

    #32917
    AvatarMichael Morgan
    Moderator

    Yes, but depending on your extrusion clearance you might need to ream out the holes with a 13/32 drill bit. If you do the drilling before assembling the parts you can get away with a standard length bit. The rudder post works without any clearance drilling.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.