How to set-up the servos on Dusty piper pawnee

Home Forum Printing and Tech. Support RC equipment How to set-up the servos on Dusty piper pawnee

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #28179
    Avatarforbesbrb
    Participant

    i have got to the stage in my build that i have to put the servo’s into my plane but i am confused i can’t find any information as to what channel does what is there any info with setup for the rx & tx I am stumped please help

    #28183
    apocalypsedudeapocalypsedude
    Participant

    It depends on the RX system you are using.

    Which radio and receiver do you use?

    #28237
    Petr ŠťásekPetr Šťásek
    Keymaster

    Basically everything goes to single channel, but the channel order is different for each system.

    I usually use the following channel order on OpenTX (you can set anything anywhere you wish)

    1 – left aileron
    2 – left flap
    3 – motor
    4 – elevator
    5 – rudder
    6 – landing gear
    7 – right flap
    8 – right aileron

    #28357
    Avatarforbesbrb
    Participant

    hi there i am using a 9 channel turnigy with matching receiver servos are turnigy as well

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.