Joker Spinner doesn`t fitt very well to the fuselage

Home Forum Printing and Tech. Support Assembly, finishing Joker Spinner doesn`t fitt very well to the fuselage

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1392645
    Avatarstefan.schablitzky
    Participant

    Hi at all,
    when i mount the spinner it doesn`t look very well because the motor has an other angle than the outher side of the mounting wall.
    but this is an layout problem in fuselage 1.
    So i have make a spacer between spinner an fuselage 1.
    I can send you the stl file if you want to print it too.

    Best regards
    Stefan

    Attachments:
    You must be logged in to view attached files.
    #1392681
    Avatarstefan.schablitzky
    Participant

    pictures will not upload and can`t edit the post, sorry.

    Attachments:
    You must be logged in to view attached files.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.