P-51 overweight

Home Forum Printing and Tech. Support P-51 overweight

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #224521
    Avatarpeter.landin81
    Participant

    Hi!
    I have printed the full body and its to heavy. I have use the attached FFF file in to simplify3d for the body and its set to 0.25mm 2 outer shells and no top bottom.

    I just printed the middle part again and it should be 15g, but its 24. No infills and extruder set to 1. I have been printing for many years and this is just nagging me alot.. Is the FFF wrong programmed? Should it be only 1 outer shell?

    #226388
    Avatarmartin.hammond
    Participant

    The planes i have printed all have the 1st few layers with 2 shells and the rest have 1 shell,i dont use S3d but i believe it has this option that uses 2 processes
    to achieve this.

    #227816
    Avatarpeter.landin81
    Participant

    Both FFF files for “Fuselage 1” and “Fuselage 2” has 0 top and bottom layers and 2 outline shells. I cant understand why the parts will weight the doubble =/

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.