P47 N-15 Thunderbolt servo

Home Forum Printing and Tech. Support RC equipment P47 N-15 Thunderbolt servo

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #29339
    Avatarpetarholland
    Participant

    Good morning guys, i am placing the rc equipment order on hobbyking with all the parts i need for my plane.

    The suggested servo;
    https://hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html
    is not available on the european warehouse…

    Can i replace the HXT with this model?
    https://hobbyking.com/en_us/turnigytm-tg9z-eco-micro-servo-1-7kg-0-12sec-9g.html
    Is only 2mm bigger, it can fits on my wing??

    If someone can suggest a valid replacement, it will be amazing 🙂

    Thanks,
    Petar

    #29406
    Petr ŠťásekPetr Šťásek
    Keymaster

    The direct replacement is the Tower Pro SG90. There are plenty of these available over the internets 😉

    #29409
    apocalypsedudeapocalypsedude
    Participant

    Yes, but I would suggest to take SG92R Servos. Same size as HXT900 / SG90 but better gears with less play.

    #29426
    Avatarpetarholland
    Participant

    Thank you for the response! so no viable option on hobbyking, i guess ^^ any raccomendations on a good rc model store in europe? i live in italy, and i came from quadcopter… Pretty noob about rc plane 🙂

    #29439
    apocalypsedudeapocalypsedude
    Participant

    I think the servo you linked will fit, too.
    If not, it is easy to get them fitting. Don’t worry too much about 2mm.
    I even think they are the same size like HXT900 and there is just a typing error.

    I get my RC stuf often from banggood, if it is not urgent.
    And I like most of the Turnigy motors from Hobbyking.

    In urgent cases there is a small RC shop just a few km away from me.

    #29444
    Avatarpetarholland
    Participant

    Thanks for the help! I placed my order ^^

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.