Problems slicing STLs from P-51D model

Home Forum Printing and Tech. Support Problems slicing STLs from P-51D model

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10222
    nathaniel.jachim
    Participant

    Hi All,

    I am having problems with Cura slicing my model. after slicing and viewing the layers I do not see any of the internal support in layers. I have attached an image. I have had this problem opening the STLs in Cura, Makerbot Desktop and Matter control. I am wondering if there is some setting that is not correct or if this is not really a problem but my running assumption is that if its not showed in the layers after slicing it will not be there when printed.

    Attachments:
    You must be logged in to view attached files.
    #10225
    Stepan Dokoupil
    Keymaster

    hello try import our prepared setting which is included in package, this video should help you or this video or for MatterControl video
    By the way the best result you will get with Simplify3D
    Makerbot desktop is not compatible with our STL… please have a look to our PDF/VIDEO userguide and FAQ

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.