PT-17 150% Home › Forum › Your planes › PT-17 150% This topic has 9 replies, 3 voices, and was last updated 1 year, 10 months ago by brothers.matthew. Viewing 10 posts - 1 through 10 (of 10 total) Author Posts 29.11.17 at 15:31 #22653 siejak_olivierParticipant Hi guys ! Just started printing of the PT-17 in 150% scale. Foreseen to put G60 Turnigy motor with 15/6 propeller. Motot mount and some parts from main landing gear done. I will post some pics asap and the progress of the project. Olivier 02.12.17 at 09:40 #22738 siejak_olivierParticipant Hi ! As promise, some pics. Main landing gear legs 02.12.17 at 09:43 #22739 siejak_olivierParticipant Again Attachments:You must be logged in to view attached files. 20171202_102440 02.12.17 at 09:43 #22741 siejak_olivierParticipant Motor mount Attachments:You must be logged in to view attached files. 20171202_102459 02.12.17 at 09:44 #22743 siejak_olivierParticipant With foreseen motor : Turnigy G60 Attachments:You must be logged in to view attached files. 20171202_102600 02.12.17 at 09:45 #22745 siejak_olivierParticipant Motor mount : 25hours printing… 😀 02.12.17 at 09:45 #22746 siejak_olivierParticipant Motor mount with propeller : 15×6 Attachments:You must be logged in to view attached files. 20171202_102616 02.12.17 at 09:47 #22749 siejak_olivierParticipant At that time, no more printing as far as i’m waiting for new PTFE connectors out of my extruder. Printer is sleeping 🙂 10.2.18 at 21:54 #27421 gunkleneilParticipant Looking forward to seeing more as you print it. Are you just using the scale function in your slicer to increase each part to 150 or some other way? 24.3.19 at 22:45 #62157 brothers.matthewParticipant Looking forward to a flight video Author Posts Viewing 10 posts - 1 through 10 (of 10 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Please enter an answer in digits:5 × 1 = Enter something special: Log In