Settings for Simplify3D V 4.0.

Home Forum Printing and Tech. Support Settings for Simplify3D V 4.0.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #18395

    I am printing a Qtrainer.

    I am using Simplify3D Version 4.0.
    Taz 6 printer.5 Nozzle.

    Top Solid Layers = 0
    Bottom Solid layers = 0
    Outline/Perimeter Shells = 1

    I have attached “QB20 wing L1” this is my first print. Could you please tell me what setting (and values) I need to use to clean up the inside of this part? Do you have any suggestions on changing any of the above settings or any other settings to receive a better print?

    Thanks in advance for your help… Rich


    I have made the attachment smaller… last try.

    You must be logged in to view attached files.
    Stepan DokoupilStepan Dokoupil

    Hello, the best way is use our prepared Factory file for Simplify3D and edit it for use with your printer (build volume,retraction maynly if you are using bowden extruder) please look at our PDF/VIDEO userguide with all this information, also FAQ section is important…
    From the picture I guess you need uncheck “retract only outer perimeter”


    I never see 3D printing with my own eyes but now your amazing site given me the chance to experience 3D printing. I think is very convenient for us to use all these things because you are providing the tutorial of all the basic of the tools of computer.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.