Stearman PT-17: Provided gcode for landing gear legs needs support generated

Home Forum Printing and Tech. Support Stearman PT-17: Provided gcode for landing gear legs needs support generated

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10702
    Matthew Poindexter
    Participant

    The provided gcode for the Stearmn PT-17 Kaydet, “Ste_gear_legs.gcode”, should probably of been generated with support underneath the tabs on the side. See enclosed picture. I can reslice this and reprint it myself, but thought you might wish to fix the provided gcode for future downloaders. I really should of stepped through the gcode and checked before I printed it…oh well 🙂

    Thanks for a great model, the Spitfire you bundled with Prusa3D got me hooked and can’t wait to finish this one.

    Chief

    Attachments:
    You must be logged in to view attached files.
    #10711
    Geoff Sim
    Participant

    I have just completed the print of this model, and found that I needed to add supports for a few items, this being one of them.
    The tailwheel is also a candidate.

    For all the S3d factories, I started with the supplied versions, and tweaked each one to suit my setup.
    The single skins were the ones that I made the least tweaks to, but the solid parts needed more work to print successfully on my machine.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.