Wheel and Tyre

Home Forum 3DLabGANG projects SZD-21-2B “Kobuz 3” Wheel and Tyre

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #52368
    Avatarthomasc5
    Participant

    Here are 2 photos of my experiment to get a 70 by 25mm wheel for the Kobuz. The get this take an STL file for the Dusty 100mm tyre and resize using Simplify3D to 70mm for the x and y axis and 25 mm for the Z axis. Infill 20%, top and bottom layers set to 4 and perimeter to 3. For the wheel hub resize the x and y axis to 70% but for the z axis resize to 12.5 mm and print 2 copies and glue them together so you get the nice spokes on both sides. I quess you could do this with files from other models but I like the knobby tyres on Dusty

    Attachments:
    You must be logged in to view attached files.
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.