Zivico Edge Prints

This topic has 12 replies, 1 voice, and was last updated 4 months, 1 week ago by rollimv.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
02.10.17 at 00:48 #20459

Michael Morgan
Moderator

Here is a mod I did on the wingtips to match the new V3 Edges for 2017 Red Bull series

Attachments:
You must be logged in to view attached files.

04.10.17 at 07:05 #20565

Egbert Foerster
Participant

Hi, I’m just building my Edge,
tell me, where have you got the wingtips ?

cu

02.11.17 at 03:58 #21369

nik8e
Participant

I want that wingtips too!!! 🙂

26.11.17 at 16:51 #22485

Валерий Эйсымонт
Participant

Для более надёжного крепления крыла я использую деревянные стержни D=5мм. Замок фиксирую вкладышем на магнитах.

Attachments:
You must be logged in to view attached files.

26.11.17 at 23:48 #22516

nik8e
Participant

Nice idea this insert to for not lose wing!
It’s not clear how exactly work but, thank you

27.11.17 at 15:25 #22549

Валерий Эйсымонт
Participant

В этой вставке и в фюзеляже стоят магниты. На них вставка держится между защёлок замка.

27.11.17 at 19:32 #22563

nik8e
Participant

thank you (y)

01.12.17 at 02:50 #22688

Michael Morgan
Moderator

Sorry for the delay, here are a set of V3 tips that I designed. They print with a single wall, same as the original wing tip.

Attachments:
You must be logged in to view attached files.

01.12.17 at 03:40 #22692

nik8e
Participant

THANK YOU A LOT Michael! 🙂

01.12.17 at 06:12 #22701

Egbert Foerster
Participant

very thanks
Egbert

22.2.18 at 21:26 #27969

Валерий Эйсымонт
Participant

08.3.19 at 11:34 #60544

melet12345678
Participant

My plane is ready, how would I secure the wings as that lock isn’t enough.

Attachments:
You must be logged in to view attached files.

23.2.20 at 20:40 #1400886

rollimv
Participant

My Edge is ready, waiting for better Weather to fly.

Attachments:
You must be logged in to view attached files.
Author

Posts