[XBob]

Excuse me it was a reply to Post 1417403 on page 15

[XBob]

Hi Ulf,

The boat is great fun to use. But i also got the shaft problem and had to retrieve the boat twice already.
I tried it in PLA and PETG, could try ABS or Nylon but hadn’t had the time yet.

Can you send me the upgraded part for testing?

Thanks.

[XBob]

Thanks for your reply Ulf.

I’ve done a little calculations and going to experiment on the 900kv/2S setup.
now only to find a local store for the bearings.

I’ll let you know

[XBob]

Hi Ulf,

I’m making a list of the parts I need to buy i and in the guide there is the Turningy AeroDrive 5055 430 which is 5S-8S.
You recommend using 3S or 4S batteries.
Is this correct?

I saw one comment of someone who tried this setup in the canal but it wasn’t successful (talking about speed, probably cog).
Jean talked about using an other motor (850/900kv) with a 2S battery, but I couldn’t find the final answer.

So my question is, which motor or calculation should i use for this model.

Thanks in advance.
Looking forward to print (and sail) this boat 🙂

[Author]

Posts