Markus Desel

Forum Replies Created

Viewing 5 posts - 16 through 20 (of 20 total)
  • Author
    Posts
  • in reply to: SZD-21-2B "Kobuz 3" Q&A #37626
    AvatarMarkus Desel
    Moderator

    Hi Ralf,
    The weight of the parts I printed are always about 10% lighter than the estimated weight by Simplify3D.
    For the test parts I weighted W1=170gramms and F7=96gramms.
    My parts have always been lighter than the weights given by 3DLabprint for their original planes, meaning its probably no problem if they´re a little bit heavier than mine.

    Grüße,
    Markus.

    in reply to: SZD-21-2B "Kobuz 3" Q&A #37623
    AvatarMarkus Desel
    Moderator

    I uploaded some test files in case you want to check your printer compatibility ( https://www.dropbox.com/s/15d25j0l8bzs1iq/Test%20files%20Kobuz3.rar?dl=0 ).
    I also Uploaded additional footage with better quality ( https://youtu.be/gr_0nK03snQ ).

    Greetings,
    Markus

    in reply to: SZD-21-2B "Kobuz 3" Q&A #37588
    AvatarMarkus Desel
    Moderator

    Hi Thomas,
    The 2 larger carbontubes are used as the wing spar and should be in one piece. If you can’t find any in that length, you could combine 2 by putting a 14mm diameter tube inside the others and glueing them together. I bought the ones I used here: https://www.r-g.de

    Cheers,
    Markus

    in reply to: SZD-21-2B "Kobuz 3" Q&A #37523
    AvatarMarkus Desel
    Moderator

    I weighted some parts I found. Every part weights about 10% less than shown by Simplify3D using the available Factory files, e.g. “W1” weights 170gramms and Simplify3D shows 190gramms.
    I can create a spreadsheet for you, in case you don´t have access to Simplify3D.
    Pls let me know if there are still any questions, I´ll be happy to help

    in reply to: SZD-21-2B "Kobuz 3" Q&A #37505
    AvatarMarkus Desel
    Moderator

    Thank you for the interest, I’m not sure if I have single wing parts left, so I might have to reprint one. I will let you know as soon as I get home.

Viewing 5 posts - 16 through 20 (of 20 total)