Semi scale 3D printed model of Consolidated PBY Catalina with about 1,7m wingspan made by Martin Klöpfer. Features retractable floats for better in air behavior, same as the original. The flying boat is in civilian version, so there’s no gun turret on the nose and structures to the rear gunning blisters since they are easier to be added than removed when unwanted.
You will get:
You will need:
See more details in Consolidated Catalina PBY userguide
Semi scale 3D printed model of Consolidated PBY Catalina with about 1,7m wingspan made by Martin Klöpfer. Features retractable floats for better in air behavior, same as the original. The flying boat is in civilian version, so there’s no gun turret on the nose and structures to the rear gunning blisters since they are easier to be added than removed when unwanted.
NOTE: 3DLabGANG section contains independent creators products. 3DLabPrint takes no responsibility for the contents.
All parts were printed on a Prusa MK3, sometimes using the full base size of 250 x 210 mm. Minimum print volume required is 200 x 200 x 180, but you’ll have to modify the S3D-factory files (a little less on the base might work as well). Recommended nozzle is 0,4mm
Slicing software: Simplify 3D
Extensive hi-tech 3d structural reinforcement resulting in solid yet lightweight airframe thanks to additive 3Dprinting technology
Each plane has been thoroughly tested to find ideal shape and best possible inner structure
Choose your aircraft, download 3d files and print as many you need. Using your desktop 3Dprinter