In-house developed and produced Airplane grade LW PLA Filament.
50 USD (43 EUR) for 2.2lbs/1kg (2-2.7kg normal PLA equivalent)
Following the success of our in-house produced PolyAir 1.0 focused on improving the toughness of single-wall printed RC models, we’re presenting the PolyLight 1.0 – The active foaming lightweight LW-PLA material. Depending on hotend temperature, the material increases its volume more than twice during extrusion resulting in very lightweight parts. Suitable especially for smaller models and parts where strength is not so critical.
PolyLight 1.0 is recommended especially for our LW Planes models designed to be printed in single-pass (vase) mode with reduced travel moves but used wisely it can also be used as a complement to the PolyAir to improve the wing loading of any of our models. For example, every gram saved on tail parts counts more than twice in the need to balance the model improving weight distribution.
Since the filament foams up when being printed, a single spool lasts for more than twice the amount of parts in volume, compared to non-foaming filaments. Lowered wing loading results in lower stall speed and impact energy when things go sideways. That means the model is less prone to damage and it actually saves costs.
We chose to make the material in light grey colour, that’s the most universal base colour for painting. Models printed in light grey are not translucent and therefore it’s easier to create a good-looking scale paint job. Parts can be easily sanded to make a nice surface finish.
The filament is produced from premium ingredients, with tight tolerances on our automated production line and comes in a resealable bag for convenient use. Spools are made from recycled plastic waste.
Available shipping country (max 6 spools per order):
Australia, USA, South Korea, Japan, China, Austria, Belgium,Taiwan, Bulgaria, Croatia, Hong Kong, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxemburg, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, Serbia and many more…
Extensive hi-tech 3d structural reinforcement resulting in solid yet lightweight airframe thanks to additive 3Dprinting technology
Each plane has been thoroughly tested to find ideal shape and best possible inner structure
Choose your aircraft, download 3d files and print as many you need. Using your desktop 3Dprinter